HP Itaniums上一次ORA-240异常处理

一、问题由来
今天有网友和我说,他的数据库始终只能mount,不能打开到open状态,具体状态为:

SQL> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now

启动数据库一直停留在Database mounted.
最后报ORA-03113: end-of-file on communication channel

二、数据库环境

OS version:HP-UX Itanium  version 11.31
Oracle version:Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit

三、日志文件错误
查看alert日志

Fri Nov 11 09:31:01 2011
Completed: ALTER DATABASE   MOUNT
Fri Nov 11 09:31:08 2011
ALTER DATABASE OPEN
Fri Nov 11 09:40:32 2011
Errors in file /opt/oracle/oracle1/admin/gminer/bdump/gminer_dbw0_3122.trc:
ORA-00240: control file enqueue held for more than 120 seconds
Fri Nov 11 09:47:18 2011
Errors in file /opt/oracle/oracle1/admin/gminer/bdump/gminer_dbw0_3122.trc:
Fri Nov 11 10:02:53 2011
Errors in file /opt/oracle/oracle1/admin/gminer/udump/gminer_ora_3555.trc:
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 3122'
Fri Nov 11 10:02:55 2011
System State dumped to trace file /opt/oracle/oracle1/admin/gminer/udump/gminer_ora_3555.trc
Killing enqueue blocker (pid=3122) on resource CF-00000000-00000000
 by killing session 54.1
Fri Nov 11 10:07:57 2011
Errors in file /opt/oracle/oracle1/admin/gminer/udump/gminer_ora_3555.trc:
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 3122'
Fri Nov 11 10:07:59 2011
System State dumped to trace file /opt/oracle/oracle1/admin/gminer/udump/gminer_ora_3555.trc
Killing enqueue blocker (pid=3122) on resource CF-00000000-00000000
 by terminating the process
USER: terminating instance due to error 2103
Instance terminated by USER, pid = 3555

四、分析ORA-00240和ORA-00494

[oracle@node1 ~]$ oerr ora 240
00240, 00000, "control file enqueue held for more than %s seconds"
// *Cause:  The current process did not release the control file enqueue within
//          the maximum allowed time.
// *Action: Reissue any commands that failed and contact Oracle Support
//          Services with the error information.
[oracle@node1 ~]$ oerr ora 494
00494, 00000, "enqueue%s held for too long%s by '%s'"
// *Cause:  The specified process did not release the enqueue within
//          the maximum allowed time.
// *Action: Reissue any commands that failed and contact Oracle Support
//          Services with the incident information.
ORA-00240: control file enqueue held for more than 120 seconds
ORA-00494: enqueue [CF] held for too long (more than 900 seconds)

dbw0进程持有control file enqueue超过了默认的900s,导致系统kill掉持有这个enqueue的会话,然后数据库自动终止。现在问题定位在control file enqueue的持有时间为什么会超时(ORA-00240)上面

五、深入理解ORA-00240

ORA-00240: control file enqueue held for more than 120 seconds
The Developers confirmed that this is just a warning to let the DBA know that a CF enqueue is being held for more than 120 seconds. 
This is not an error, and error will occur if a CF enqueue is held for more than 900 seconds (15 minutes) and this is not the case here.
The message occurs when there are many datafiles in the database. DBWriter (dbw0) is taking too much time to release the CF enqueue due to having to open these datafiles.

从mos的这几句中,可以分析出来,是因为dbw0在open数据文件的过程中占用了太多时间的CF enqueue。这说明和存储或者asm有关系

六、继续分析日志
分析日志,找出出现ORA-00240和ORA-00494之前出现过什么错误

Stopping Job queue slave processes, flags = 7
Thu Nov 10 17:52:26 2011
Job queue slave processes stopped
Thu Nov 10 17:54:23 2011
Errors in file /opt/oracle/oracle1/admin/gminer/bdump/gminer_asmb_26101.trc:
ORA-00600: internal error code, arguments: [kffmAllocate_1], [8], [2], [], [], [], [], []
Thu Nov 10 17:54:24 2011
Errors in file /opt/oracle/oracle1/admin/gminer/bdump/gminer_asmb_26101.trc:
ORA-00600: internal error code, arguments: [kffmAllocate_1], [8], [2], [], [], [], [], []
Thu Nov 10 17:54:24 2011
ASMB: terminating instance due to error 486
Termination issued to instance processes. Waiting for the processes to exit
Instance terminated by ASMB, pid = 26101

通过这个,发现和asm有关系,更加确定了自己的猜测

七、分析asm日志

Fri Nov 11 09:44:42 2011
Errors in file /opt/oracle/oracle1/admin/+ASM/bdump/+asm_gmon_24008.trc:
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
HPUX-ia64 Error: 11: Resource temporarily unavailable
Additional information: 4
Additional information: 2044
Additional information: -1

+asm_gmon_24008.trc中内容也就报这些错误,不再贴出

八、mos中查找ORA-27091和ORA-27072
Bug 8236874 – HP-Itanium: Intermittent ORA-27091, ORA-27072, Additional information: 4 on HPUX中有类此描述

  ORA-01115: IO error reading block from file fff (block # bbb) 
  ORA-01110: data file 5: '/dev/xxx'
  ORA-27091: unable to queue I/O 
  ORA-27072: File I/O error 
  Additional information: 4  
  Additional information: xxx
  Additional information: yyy

问题很类此,进一步确信是asm的问题

八、在查询mos中ORA-00240和asm相关主题
发现HP Itanium – ORA-240 or process on ASM & Database hang [ID 1105825.1],阅读完毕,马上查去阅读gminer_ora_3555.trc文件
果然发现和mos中一致的描述

*** SESSION ID:(40.1) 2011-11-11 09:36:59.860
Waited for detached process: DBW0 for 300 seconds:
*** 2011-11-11 09:36:59.860
Dumping diagnostic information for DBW0:
OS pid = 3122
loadavg : 0.00 0.01 0.01
Swapinfo : 
	Avail = 124485.08Mb Used = 62062.20Mb
	Swap free = 62422.88Mb Kernel rsvd = 4492.72Mb
	Free Mem  = 60374.91Mb 
  F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    STIME TTY       TIME COMD
1401 S   oracle  3122     1  0 154 20 e00000090de8b980 55372 e0000009203b1340 09:19:12 ?         0:06 ora_dbw0_gminer
Attaching to program: /opt/oracle/oracle1/bin/oracle, process 3122
warning: The shared libraries were not privately mapped; setting a
breakpoint in a shared library will not work until you rerun the program;
stepping over longjmp calls will not work as expected.
Please set the kernel variable "shlib_debug_enable" to 1 to enable the shared library debugging
warning: Load module /opt/oracle/oracle1/lib/libskgxp10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libhasgen10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libocr10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libocrb10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libocrutl10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libdbcfg10.so has been stripped.  
Debugging information is not available.
warning: Load module /opt/oracle/oracle1/lib/libnnz10.so has been stripped.  
Debugging information is not available.
0xc00000000043e3f0:0 in pw_wait+0x30 () from /usr/lib/hpux64/libc.so.1
(gdb) (gdb) #0  0xc00000000043e3f0:0 in pw_wait+0x30 () from /usr/lib/hpux64/libc.so.1
#1  0x40000000094e5ee0:0 in pw_wait () at sskgp.c:2245
#2  0x4000000002cb36c0:0 in sskgpwwait () at sskgp.c:926
#3  0x4000000002f16440:0 in skgpwwait () at skgp.c:2137
#4  0x4000000002e28770:0 in ksliwat () at ksl.c:7428
#5  0x400000000402a7f0:0 in kslwaitns_timed () at ksl.c:7652
#6  0x4000000002d3de40:0 in kskthbwt () at ksk.c:2263
#7  0x4000000002d3c940:0 in kslwait () at ksl.c:7616
#8  0x40000000041780e0:0 in ksvsubmit () at ksv.c:1975
#9  0x4000000004d5b710:0 in kfncSlaveSubmit () at kfnc.c:2913
#10 0x4000000004d63120:0 in kfncFileIdentify () at kfnc.c:1638
#11 0x4000000004cfb890:0 in kfioIdentify () at kfio.c:1431
#12 0x4000000004137c20:0 in ksfd_osmopn () at ksfd.c:16583
#13 0x40000000044c9850:0 in $cold_ksfdopn+0xc0 () at kfio.c:1654
#14 0x4000000002630aa0:0 in kcfbid () at kcf.c:13447
#15 0x40000000025b72f0:0 in kcfida () at kcf.c:13599
#16 0x4000000002d3bc80:0 in ksbabs () at ksb.c:1390
#17 0x4000000003aed5f0:0 in ksbrdp () at ksb.c:2971
#18 0x4000000002807f50:0 in opirip () at opirip.c:283
#19 0x400000000200f680:0 in $cold_opidrv+0x580 ()
#20 0x400000000277edf0:0 in sou2o () at sou2o.c:86
#21 0x4000000001fff020:0 in $cold_opimai_real+0x280 ()
#22 0x400000000269c5e0:0 in main () at opimai.c:173
(gdb) Detaching from program: /opt/oracle/oracle1/bin/oracle, process 3122

九、HP官网描述

Issue
Any questions on the use of software developed and maintained by Oracle should involve Oracle technical support. Oracle, not HP, supports Oracle software.
All ITRC HP-UX version 11.31 March 2009 patch bundles were applied to two HP Integrity rx3600-based Oracle RAC nodes. After this installation, the crsd.bin process from the Oracle RAC Clustering software seemed to hang at random intervals, causing a cluster check process launched by a third party to wait indefinitely and to eventually consume all available RAM memory.
A situation where crsd.bin hangs may cause RAC to issue a Transfer of Control (TOC), that is, a system restart with crash dump.

Solution
If any patches related to Oracle RAC are included in a patch bundle (whether it is HP-UX specific patching that RAC depends upon or vice versa), RAC requires that the binaries be relinked prior to starting them.
An alternative might be to (temporarily) uninstall the patch bundle.
The relink of the binaries should be done by a DBA, they should know how to perform that action.
In the current situation, relinking the Oracle RAC binaries resolved the issue.

NOTE:
It seems this problem can also be caused by the installation of HP patches PHKL_38762 or PHKL_39145. QXCR1000940361 tracked the problem. This has been fixed now, and the problem is not present anymore when installing the superseded patch PHKL_40208.
The problem of QXCR1000940361 has existed before the fix of PHKL_39145 was introduced so we dont set a patch warning.

十、解决方案
问题定位完毕是因为缺少打HP patches PHKL_38762 or PHKL_39145的补丁导致
根据HP官网的建议,打HP patches PHKL_38762 or PHKL_39145解决这个问题,也可以打上PHKL_40208补丁问题解决

十一、补充说明
1、因为系统以前可以运行,那么我猜测这个bug应该有偶然性,让网友重启asm,然后启动数据库正常
2、在处理问题过程中,因缺少耐心,开始没有仔细阅读trace文件,导致问题分析过程中走了一些弯路
3、这个是我第一次发现因为系统补丁没有打,导致数据库异常

mysqlimport使用

一、网友需求
文档中有类此如a b c0e f g0i j k0x f f的字符串,需要以0分行,以空格分列导入到mysql数据库的一张只有三个列的表中

二、mysqlimport使用说明

mysqlimport  Ver 3.7 Distrib 5.5.9, for Win32 (x86)
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Loads tables from text files in various formats.  The base name of the
text file must be the name of the table that should be used.
If one uses sockets to connect to the MySQL server, the server will open and
read the text file directly. In other cases the client will open the text
file. The SQL command 'LOAD DATA INFILE' is used to import the rows.

Usage: mysqlimport [OPTIONS] database textfile...
Default options are read from the following files in the given order:
C:\Windows\my.ini C:\Windows\my.cnf C:\my.ini C:\my.cnf C:\Program Files\MySQL\MySQL Server 5.5\my.ini C:\Program Files\MySQL\MySQL Server 5.5\my.cnf 
The following groups are read: mysqlimport client
The following options may be given as the first argument:
--print-defaults        Print the program argument list and exit.
--no-defaults           Don't read default options from any option file.
--defaults-file=#       Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
  --character-sets-dir=name 
                      Directory for character set files.
  --default-character-set=name 
                      Set the default character set.
  -c, --columns=name  Use only these columns to import the data to. Give the
                      column names in a comma separated list. This is same as
                      giving columns to LOAD DATA INFILE.
  -C, --compress      Use compression in server/client protocol.
  -#, --debug[=name]  Output debug log. Often this is 'd:t:o,filename'.
  --debug-check       Check memory and open file usage at exit.
  --debug-info        Print some debug info at exit.
  -d, --delete        First delete all rows from table.
  --fields-terminated-by=name 
                      Fields in the input file are terminated by the given
                      string.
  --fields-enclosed-by=name 
                      Fields in the import file are enclosed by the given
                      character.
  --fields-optionally-enclosed-by=name 
                      Fields in the input file are optionally enclosed by the
                      given character.
  --fields-escaped-by=name 
                      Fields in the input file are escaped by the given
                      character.
  -f, --force         Continue even if we get an SQL error.
  -?, --help          Displays this help and exits.
  -h, --host=name     Connect to host.
  -i, --ignore        If duplicate unique key was found, keep old row.
  --ignore-lines=#    Ignore first n lines of data infile.
  --lines-terminated-by=name 
                      Lines in the input file are terminated by the given
                      string.
  -L, --local         Read all files through the client.
  -l, --lock-tables   Lock all tables for write (this disables threads).
  --low-priority      Use LOW_PRIORITY when updating the table.
  -p, --password[=name] 
                      Password to use when connecting to server. If password is
                      not given it's asked from the tty.
  -W, --pipe          Use named pipes to connect to server.
  -P, --port=#        Port number to use for connection or 0 for default to, in
                      order of preference, my.cnf, $MYSQL_TCP_PORT,
                      /etc/services, built-in default (3306).
  --protocol=name     The protocol to use for connection (tcp, socket, pipe,
                      memory).
  -r, --replace       If duplicate unique key was found, replace old row.
  --shared-memory-base-name=name 
                      Base name of shared memory.
  -s, --silent        Be more silent.
  -S, --socket=name   The socket file to use for connection.
  --ssl               Enable SSL for connection (automatically enabled with
                      other flags).
  --ssl-ca=name       CA file in PEM format (check OpenSSL docs, implies
                      --ssl).
  --ssl-capath=name   CA directory (check OpenSSL docs, implies --ssl).
  --ssl-cert=name     X509 cert in PEM format (implies --ssl).
  --ssl-cipher=name   SSL cipher to use (implies --ssl).
  --ssl-key=name      X509 key in PEM format (implies --ssl).
  --ssl-verify-server-cert 
                      Verify server's "Common Name" in its cert against
                      hostname used when connecting. This option is disabled by
                      default.
  --use-threads=#     Load files in parallel. The argument is the number of
                      threads to use for loading data.
  -u, --user=name     User for login if not current user.
  -v, --verbose       Print info about the various stages.
  -V, --version       Output version information and exit.

Variables (--variable-name=value)
and boolean options {FALSE|TRUE}  Value (after reading options)
--------------------------------- ----------------------------------------
character-sets-dir                (No default value)
default-character-set             auto
columns                           (No default value)
compress                          FALSE
debug-check                       FALSE
debug-info                        FALSE
delete                            FALSE
fields-terminated-by              (No default value)
fields-enclosed-by                (No default value)
fields-optionally-enclosed-by     (No default value)
fields-escaped-by                 (No default value)
force                             FALSE
host                              (No default value)
ignore                            FALSE
ignore-lines                      0
lines-terminated-by               (No default value)
local                             FALSE
lock-tables                       FALSE
low-priority                      FALSE
port                              3306
replace                           FALSE
shared-memory-base-name           (No default value)
silent                            FALSE
socket                            (No default value)
ssl                               FALSE
ssl-ca                            (No default value)
ssl-capath                        (No default value)
ssl-cert                          (No default value)
ssl-cipher                        (No default value)
ssl-key                           (No default value)
ssl-verify-server-cert            FALSE
use-threads                       0
user                              (No default value)
verbose                           FALSE

三、模拟实现网友需求
1、创建一张import表,结构如下

mysql> desc xifenfei.import;
+-------+---------+------+-----+---------+-------+
| Field | Type    | Null | Key | Default | Extra |
+-------+---------+------+-----+---------+-------+
| a     | char(1) | YES  |     | NULL    |       |
| b     | char(1) | YES  |     | NULL    |       |
| c     | char(1) | YES  |     | NULL    |       |
+-------+---------+------+-----+---------+-------+
3 rows in set (0.02 sec)

2、在D盘根目录下创建一个import.data文件,内容如下
a b c0e f g0i j k0x f f

3、实现导入

C:\Users\XIFENFEI>mysqlimport -uroot -pxifenfei --fields-terminated-by=" "  --lines-terminated-by="0" --columns=a,b,c -d xifenfei d:/import.data 
xifenfei.import: Records: 4  Deleted: 0  Skipped: 0  Warnings: 0
--表明导入记录4条,删除0条,跳过0条,警告0条

4、验证导入结果

mysql> select * from xifenfei.import;
+------+------+------+
| a    | b    | c    |
+------+------+------+
| a    | b    | c    |
| e    | f    | g    |
| i    | j    | k    |
| x    | f    | f    |
+------+------+------+
4 rows in set (0.00 sec)

四、mysqlimport使用补充说明
1、文件名的第一个字符串需要和数据库中的表名一致(如:这里的import.data对应的表名就是import)
2、直接通过字符串指定数据库名称(如:这里的xifenfei)
3、行/列分隔符都使用双引号括起来(可能还有其他方案,但是这样方便)

plsql dev中Dynamic Performance Tables not accessible分析解决

相信很多使用plsql dev的朋友多遇到过类此如下面的提示:

Dynamic Performance Tables not accessible, 
Automatic Statistics Disabled for this session 

You can disable statistics in the preference menu,or obtanin select 
priviliges on the v$session,v$sesstat and v$statname tables 

一、产生该提示原因
plsql dev在用户运行过程中,要收集用户统计信息,但是由于你现在登录的用户没有访问v$session,v$sesstat and v$statname视图的权限,所以不能收集当前用户的统计信息,和plsql dev工具中配置的Automatic Statistics相冲突,所以就出现了这个提示,试验验证:

[oracle@xifenfei ~]$ sqlplus / as sysdba

SQL*Plus: Release 11.2.0.3.0 Production on Thu Nov 10 04:31:57 2011

Copyright (c) 1982, 2011, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

sys@XFF>create user chf identified by xifenfei;

User created.

sys@XFF>grant create session,resource to chf;

Grant succeeded.

sys@XFF>conn chf/xifenfei
Connected.
chf@XFF>select * from session_privs;

PRIVILEGE
----------------------------------------
CREATE SESSION
UNLIMITED TABLESPACE
CREATE TABLE
CREATE CLUSTER
CREATE SEQUENCE
CREATE PROCEDURE
CREATE TRIGGER
CREATE TYPE
CREATE OPERATOR
CREATE INDEXTYPE

10 rows selected.

chf@XFF>SELECT TABLE_NAME FROM USER_TAB_PRIVS;

no rows selected

创建一个chf用户,授权create session,resource,无v$session,v$sesstat and v$statname视图访问权限,使用plsql dev登录并查询user_tables表(登录时不会提示,只有用户执行了查询或者相关类此操作时候才会提示)
Dynamic Performance Tables not accessible

二、解决问题
根据警告提示,可以有两种方法解决这种警告
1、关闭plsql dev统计功能
在 Tools->Preferences->Options里 把Automatic Statistics前的那个勾子去掉,保存
2、给访问用户授权访问相关视图
授权访问v_$session,v_$sesstat,v_$statname,注意不能直接对v$视图进行授权

chf@XFF>conn / as sysdba
Connected.
sys@XFF>grant select on v_$session to chf;

Grant succeeded.

sys@XFF>grant select on v_$sesstat to chf;

Grant succeeded.

sys@XFF>grant select on v_$statname to chf;

Grant succeeded.

sys@XFF>conn chf/xifenfei
Connected.

chf@XFF>SELECT TABLE_NAME FROM USER_TAB_PRIVS;

TABLE_NAME
------------------------------
V_$SESSION
V_$SESSTAT
V_$STATNAME

三、问题分析
通过上面的解决方法,为什么授权访问v$session,v$sesstat and v$statname视图就可以Statistics用户的信息了呢?请见下面的两张图
图1:通过plsql dev中的tools–>session选项看用户统计信息
通过plsql dev中的session选项看用户统计信息
图2:通过sql语句查询用户统计信息
通过sql语句查询用户统计信息
通过两张图的比较可能会发现,他们的数值有一点点出入,那是因为我先通过tools查询出用户统计信息,再通过sql查询,所以图1中的数据有些选项会比图2小那么一点点,通过对v$session,v$sesstat and v$statname视图分析,发现其实plsql dev就是通过下面sql实现统计功能,也从而进一步说明了,为什么plsql dev收集统计信息需要对v$session,v$sesstat and v$statname视图授于访问权限

SELECT C.NAME, B.STATISTIC#, B.VALUE
  FROM V$SESSION A, V$SESSTAT B, V$STATNAME C
 WHERE A.SID = B.SID
   AND A.AUDSID = USERENV('SESSIONID')
   AND B.STATISTIC# = C.STATISTIC#
   ORDER BY C.STATISTIC#;

深入分析数据库版本相关视图

1、dba_registry视图

SQL> set line 200
SQL> col comp_name for a35 
SQL> col version for a12
SQL> col status for a6
SQL> select comp_name, version, status from dba_registry;

COMP_NAME                           VERSION      STATUS
----------------------------------- ------------ ------
Spatial                             10.2.0.5.0   VALID
Oracle interMedia                   10.2.0.5.0   VALID
OLAP Catalog                        10.2.0.5.0   VALID
Oracle Enterprise Manager           10.2.0.5.0   VALID
Oracle XML Database                 10.2.0.5.0   VALID
Oracle Text                         10.2.0.5.0   VALID
Oracle Expression Filter            10.2.0.5.0   VALID
Oracle Rule Manager                 10.2.0.5.0   VALID
Oracle Workspace Manager            10.2.0.5.0   VALID
Oracle Data Mining                  10.2.0.5.0   VALID
Oracle Database Catalog Views       10.2.0.5.0   VALID
Oracle Database Packages and Types  10.2.0.5.0   VALID
JServer JAVA Virtual Machine        10.2.0.5.0   VALID
Oracle XDK                          10.2.0.5.0   VALID
Oracle Database Java Packages       10.2.0.5.0   VALID
OLAP Analytic Workspace             10.2.0.5.0   VALID
Oracle OLAP API                     10.2.0.5.0   VALID

17 rows selected.

SQL> select dbms_metadata.get_ddl('VIEW','DBA_REGISTRY','SYS') FROM DUAL;

DBMS_METADATA.GET_DDL('VIEW','DBA_REGISTRY','SYS')
--------------------------------------------------------------------------------

  CREATE OR REPLACE FORCE VIEW "SYS"."DBA_REGISTRY" ("COMP_ID", "COMP_NAME", "VERSION", "STATUS", "MODIFIED", "NAMESPAC
E", "CONTROL", "SCHEMA", "PROCEDURE", "STARTUP", "PARENT_ID", "OTHER_SCHEMAS") A
S
  SELECT r.cid, r.cname, r.version,
       SUBSTR(dbms_registry.status_name(r.status),1,11),
       TO_CHAR(r.modified,'DD-MON-YYYY HH24:MI:SS'),
       r.namespace, i.name, s.name, r.vproc,
       DECODE(bitand(r.flags,1),1,'REQUIRED',NULL), r.pid,
       dbms_registry.schema_list_string(r.cid)
FROM registry$ r, user$ s, user$ i
WHERE r.schema# = s.user# AND r.invoker#=i.user#

SQL> DESC registry$
 Name                                                  Null?    Type
 ----------------------------------------------------- -------- ------------------------------------
 CID                                                   NOT NULL VARCHAR2(30)
 CNAME                                                          VARCHAR2(255)
 SCHEMA#                                               NOT NULL NUMBER
 INVOKER#                                              NOT NULL NUMBER
 VERSION                                                        VARCHAR2(30)
 STATUS                                                NOT NULL NUMBER
 FLAGS                                                 NOT NULL NUMBER
 MODIFIED                                                       DATE
 PID                                                            VARCHAR2(30)
 BANNER                                                         VARCHAR2(80)
 VPROC                                                          VARCHAR2(61)
 DATE_INVALID                                                   DATE
 DATE_VALID                                                     DATE
 DATE_LOADING                                                   DATE
 DATE_LOADED                                                    DATE
 DATE_UPGRADING                                                 DATE
 DATE_UPGRADED                                                  DATE
 DATE_DOWNGRADING                                               DATE
 DATE_DOWNGRADED                                                DATE
 DATE_REMOVING                                                  DATE
 DATE_REMOVED                                                   DATE
 NAMESPACE                                             NOT NULL VARCHAR2(30)
 ORG_VERSION                                                    VARCHAR2(30)
 PRV_VERSION                                                    VARCHAR2(30)

SQL> SELECT BANNER,VERSION,modified,prv_version FROM SYS.registry$;

BANNER                                                                           VERSION      MODIFIED            PRV_VERSION
-------------------------------------------------------------------------------- ------------ ------------------- ----------------
Oracle Database Catalog Views Release 10.2.0.5.0 - 64bi                          10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Database Packages and Types Release 10.2.0.5.0 - Production               10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Workspace Manager Release 10.2.0.5.0 - Production                         10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.3
JServer JAVA Virtual Machine Release 10.2.0.5.0 - Production                     10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle XDK Release 10.2.0.5.0 - Production                                       10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Database Java Packages Release 10.2.0.5.0 - Production                    10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Expression Filter Release 10.2.0.5.0 - Production                         10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Data Mining Release 10.2.0.5.0 - Production                               10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Text Release 10.2.0.5.0 - Production                                      10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle XML Database Release 10.2.0.5.0 - Production                              10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle Rule Manager Release 10.2.0.5.0 - Production                              10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle interMedia Release 10.2.0.5.0 - Production                                10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
OLAP Analytic Workspace Release 10.2.0.5.0 - Production                          10.2.0.5.0   2011-11-03 14:07:34 10.2.0.4.0
Oracle OLAP API Release 10.2.0.5.0 - Production                                  10.2.0.5.0   2011-11-03 14:07:35 10.2.0.4.0
OLAP Catalog Release 10.2.0.5.0 - Production                                     10.2.0.5.0   2011-11-03 14:07:35 10.2.0.4.0
Spatial Release 10.2.0.5.0 - Production                                          10.2.0.5.0   2011-11-03 14:07:35 10.2.0.4.0
Oracle Enterprise Manager Release 10.2.0.5.0 - Production                        10.2.0.5.0   2011-11-02 17:23:47 10.2.0.4.0

17 rows selected.

2、v$version或者PRODUCT_COMPONENT_VERSION视图

SQL> select * from v$version;

BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE    10.2.0.5.0      Production
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production

SQL> col product for a35
SQL> col product for a40
SQL> select * from PRODUCT_COMPONENT_VERSION;

PRODUCT                                  VERSION      STATUS
---------------------------------------- ------------ --------------
NLSRTL                                   10.2.0.5.0   Production
Oracle Database 10g Enterprise Edition   10.2.0.5.0   64bi
PL/SQL                                   10.2.0.5.0   Production
TNS for Linux:                           10.2.0.5.0   Production

SQL> set long 1000
SQL> set pages 0
SQL> select dbms_metadata.get_ddl('VIEW','PRODUCT_COMPONENT_VERSION','SYS') FROM DUAL;

CREATE OR REPLACE FORCE VIEW "SYS"."PRODUCT_COMPONENT_VERSION" ("PRODUCT", "VERSION", "STATUS") AS
(select
substr(banner,1, instr(banner,'Version')-1),
substr(banner, instr(banner,'Version')+8,
instr(banner,' - ')-(instr(banner,'Version')+8)),
substr(banner,instr(banner,' - ')+3)
from v$version
where instr(banner,'Version') > 0
and
((instr(banner,'Version') <   instr(banner,'Release')) or
instr(banner,'Release') = 0))
union
(select
substr(banner,1, instr(banner,'Release')-1),
substr(banner, instr(banner,'Release')+8,
instr(banner,' - ')-(instr(banner,'Release')+8)),
substr(banner,instr(banner,' - ')+3)
from v$version
where instr(banner,'Release') > 0
and
instr(banner,'Release') <   instr(banner,' - '))


SQL> COL object_name for a20
SQL> SELECT OWNER,OBJECT_NAME,OBJECT_TYPE FROM DBA_objects where object_name='V$VERSION';

OWNER                          OBJECT_NAME          OBJECT_TYPE
------------------------------ -------------------- -------------------
PUBLIC                         V$VERSION            SYNONYM

SQL> SELECT TABLE_OWNER,TABLE_NAME FROM dba_synonyms a WHERE a.synonym_name='V$VERSION';

TABLE_OWNER                    TABLE_NAME
------------------------------ ------------------------------
SYS                            V_$VERSION

SQL> SELECT OWNER,OBJECT_NAME,OBJECT_TYPE FROM DBA_objects where object_name='V_$VERSION';

OWNER                          OBJECT_NAME          OBJECT_TYPE
------------------------------ -------------------- -------------------
SYS                            V_$VERSION           VIEW

SQL> select dbms_metadata.get_ddl('VIEW','V_$VERSION','SYS') FROM DUAL;

DBMS_METADATA.GET_DDL('VIEW','V_$VERSION','SYS')
-----------------------------------------------------------------------------

  CREATE OR REPLACE FORCE VIEW "SYS"."V_$VERSION" ("BANNER") AS
  select "BANNER" from v$version

SQL> select * from v$fixed_table where name LIKE '%V%VERSION%';

NAME                            OBJECT_ID TYPE   TABLE_NUM
------------------------------ ---------- ----- ----------
GV$VERSION                     4294951314 VIEW       65537
V$VERSION                      4294951045 VIEW       65537

SQL>  COL VIEW_DEFINITION FOR A80
SQL> select * from v$fixed_view_definition where view_name='V$VERSION';

VIEW_NAME                      VIEW_DEFINITION
------------------------------ ------------------------------------------------------------------
V$VERSION                      select  BANNER from GV$VERSION where inst_id = USERENV('Instance')

SQL> select * from v$fixed_view_definition where view_name='GV$VERSION';

VIEW_NAME                      VIEW_DEFINITION
------------------------------ -------------------------------------------------------
GV$VERSION                     select inst_id, banner from x$version

SQL> DESC x$version
 Name                                                  Null?    Type
 ----------------------------------------------------- -------- ------------------------
 ADDR                                                           RAW(8)
 INDX                                                           NUMBER
 INST_ID                                                        NUMBER
 BANNER                                                         VARCHAR2(64)

SQL> SET LINE 200
SQL> SELECT * FROM x$version;

ADDR                   INDX    INST_ID BANNER
---------------- ---------- ---------- ----------------------------------------------------------------
00002AB64240D028          0          1 Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
00002AB64240D028          1          1 PL/SQL Release 10.2.0.5.0 - Production
00002AB64240D028          2          1 CORE     10.2.0.5.0      Production
00002AB64240D028          3          1 TNS for Linux: Version 10.2.0.5.0 - Production
00002AB64240D028          4          1 NLSRTL Version 10.2.0.5.0 - Production

3、查看v$instance视图

SQL> select version from v$instance;

VERSION
------------
10.2.0.5.0

--通过同v$version同样操作,得出如下语句
 SELECT KS.INST_ID,
        KSUXSINS,
        KSUXSSID,
        KSUXSHST,
        KSUXSVER,
        KSUXSTIM,
        DECODE(KSUXSSTS,
               0,
               'STARTED',
               1,
               'MOUNTED',
               2,
               'OPEN',
               3,
               'OPEN MIGRATE',
               'UNKNOWN'),
        DECODE(KSUXSSHR, 0, 'NO', 1, 'YES', 2, NULL),
        KSUXSTHR,
        DECODE(KSUXSARC, 0, 'STOPPED', 1, 'STARTED', 'FAILED'),
        DECODE(KSUXSLSW,
               0,
               NULL,
               2,
               'ARCHIVE LOG',
               3,
               'CLEAR LOG',
               4,
               'CHECKPOINT',
               5,
               'REDO GENERATION'),
        DECODE(KSUXSDBA, 0, 'ALLOWED', 'RESTRICTED'),
        DECODE(KSUXSSHP, 0, 'NO', 'YES'),
        DECODE(KVITVAL,
               0,
               'ACTIVE',
               2147483647,
               'SUSPENDED',
               'INSTANCE RECOVERY'),
        DECODE(KSUXSROL,
               1,
               'PRIMARY_INSTANCE',
               2,
               'SECONDARY_INSTANCE',
               'UNKNOWN'),
        DECODE(QUI_STATE,
               0,
               'NORMAL',
               1,
               'QUIESCING',
               2,
               'QUIESCED',
               'UNKNOWN'),
        DECODE(BITAND(KSUXSDST, 1), 0, 'NO', 1, 'YES', 'NO')
   FROM X$KSUXSINST KS, X$KVIT KV, X$QUIESCE QU
  WHERE KVITTAG = 'kcbwst';

SQL> set line 90
SQL> desc X$KSUXSINST;
 Name                                                  Null?    Type
 ----------------------------------------------------- -------- --------------
 ADDR                                                           RAW(8)
 INDX                                                           NUMBER
 INST_ID                                                        NUMBER
 KSUXSINS                                                       NUMBER
 KSUXSSID                                                       VARCHAR2(16)
 KSUXSHST                                                       VARCHAR2(64)
 KSUXSVER                                                       VARCHAR2(17)
 KSUXSTIM                                                       DATE
 KSUXSSTS                                                       NUMBER
 KSUXSSHR                                                       NUMBER
 KSUXSTHR                                                       NUMBER
 KSUXSARC                                                       NUMBER
 KSUXSLSW                                                       NUMBER
 KSUXSDBA                                                       NUMBER
 KSUXSSHP                                                       NUMBER
 KSUXSSCN                                                       VARCHAR2(16)
 KSUXSROL                                                       NUMBER
 KSUXSDST                                                       NUMBER

SQL> SELECT  KSUXSVER FROM SYS.X$KSUXSINST;

KSUXSVER
-----------------
10.2.0.5.0

Fatal NI connect error 12170

今天在一台服务器的日志文件中,发现如下信息:

Fatal NI connect error 12170.

  VERSION INFORMATION:
	TNS for Linux: Version 11.1.0.7.0 - Production
	Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
	Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
	TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
  Time: 08-NOV-2011 13:57:10
  Tracing not turned on.
  Tns error struct:
    ns main err code: 12535
    
TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    
TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
  Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.100.107.62)(PORT=52357))

查看mos,有幸发现关于该错误的相关文章
Fatal NI connect error 12170′, ‘TNS-12535: TNS:operation timed out’ Reported in 11g Alert Log [ID 1286376.1]
做了一些摘要,算是给自己做个记录,也给不能访问mos的朋友一个参考

1、适用范围

Oracle Net Services - Version: 11.1.0.6 to 11.2.0.2 - Release: 11.1 to 11.2
Oracle Server - Enterprise Edition - Version: 11.1.0.6 to 11.2.0.2   [Release: 11.1 to 11.2]
Information in this document applies to any platform.

2、问题原因

These time out related messages are mostly informational in nature.  The messages indicate the specified client connection (identified by the 'Client address:' details) has experienced a time out.  The 'nt secondary err code' identifies the underlying network transport, such as (TCP/IP) timeout limits after a client has abnormally terminated the database connection.

The 'nt secondary err code' translates to underlying network transport timeouts for the following Operating Systems:

For the Solaris system: nt secondary err code: 145:

#define ETIMEDOUT 145 /* Connection timed out */

For the Linux operating system: nt secondary err code: 110

ETIMEDOUT 110 Connection timed out

For the HP-UX system: nt secondary err code: 238:

ETIMEDOUT 238 /* Connection timed out */

For Windows based platforms: nt secondary err code: 60 (which translates to Winsock Error: 10060)

Description:  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

The reason the messages are written to the alert log is related to the use of the new 11g Automatic Diagnostic Repository (ADR) feature being enabled by default.

3、解决问题

To revert to Oracle Net Server tracing/logging, set following parameter in the server's sqlnet.ora :

DIAG_ADR_ENABLED = OFF

Also, to back out the ADR diag for the Listener component, set following parameter in the server's listener.ora:

DIAG_ADR_ENABLED_<listenername> = OFF

   - Where the <listenername> would be replaced with the actual name of the configured listener(s) in the listener.ora configuration file.  For example, if the listener name is 'LISTENER', the parameter would read:

DIAG_ADR_ENABLED_LISTENER = OFF

-Reload or restart the TNS Listener for the parameter change to take effect.

说明:这个问题是由于Automatic Diagnostic Repository中的 Oracle Net diagnostic在默认的情况下是开启的,当数据库和客户端的连接超过特定时间,就会把这样的信息写入到alert日志中,所以这不是一个致命的问题,如果偶尔出现,可以忽略有点类此ora-3136的错误